{"id":1373,"date":"2019-12-04T10:54:41","date_gmt":"2019-12-04T16:54:41","guid":{"rendered":"http:\/\/jimlund.org\/blog\/?page_id=1373"},"modified":"2022-01-31T22:52:20","modified_gmt":"2022-02-01T04:52:20","slug":"fiber-lasers","status":"publish","type":"page","link":"https:\/\/jimlund.org\/blog\/?page_id=1373","title":{"rendered":"Fiber lasers"},"content":{"rendered":"\n

200-kW pulsed Fiber Laser<\/a> (20W continuous)<\/p>\n\n\n\n

Ultrafast Optics with a Fiber Laser<\/a>. Video talks about design, shows making couplers, polishing.
2 \u03bcm Pulsed Fiber Laser Sources and Their Application in Terahertz Generation, pdf<\/a>
PULSED FIBER LASER AT 1 \u03bcm WAVELENGTH REGION, pdf<\/a>
DEVELOPMENT OF A PULSED FIBER LASER FOR LADAR SYSTEM, pdf<\/a>
All-Fiber, Directly Chirped Laser Source for Chirped-Pulse\u2013Amplification, pdf<\/a>
High Performance Pulsed Fiber Laser Systems for Scientific & Industrial Applications, pdf<\/a>
An ytterbium-doped fiber laser at 1.1 um, pdf<\/a>
HIGH POWER NANOSECOND PULSED FIBER LASER AMPLIFIERS, pdf<\/a>
<\/p>\n\n\n\n


<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n


<\/p>\n\n\n\n

Fiber laser info file<\/a>
New Lasers Improve Glass Cutting Methods, pdf<\/a><\/p>\n\n\n\n

Glass cutting w\/ short laser pulses<\/a><\/p>\n\n\n\n

Cutting glass with short laser pulses<\/strong>
“Improved laser glass cutting by spatio-temporal control of energy deposition using bursts of femtosecond pulses”, pdf<\/a>
“Laser machining of transparent brittle materials: from machining strategies to application”, pdf<\/a>
“Ultrafast laser micro-processing of transparent material”, pdf<\/a><\/p>\n\n\n\n

Laser-induced backside wet etching (LIBWE) of glass<\/strong>
Kwon et al, 2019, pdf, Breaking Taps projec<\/a><\/p>\n\n\n\n

Filamentation cutting<\/strong>
Kerr-induced self-focusing<\/a>
Thesis discusses process, uses a Ti:Sapphire laser, pdf<\/a>


<\/p>\n\n\n\n

\n\n\t\n\t\t\n\t\tMicrosoft Word – 05 OEA-2018-0017 Xiaozhu Xie V4\n\t\n\t\n\t\t\n\t\t\t\n\t\t\t\t\n\t\t\t\t\t<\/p>\n\n\n\n

Laser machining of transparent brittle materials:\nfrom machining strategies to applications
\n<\/strong><\/p>\n\n\n\n

“, pdf<\/a>

<\/p>\n\n\n\n

Laser scribing <\/strong>
“Laser scribing of glass works by thermal shock. Specifically, all glasses absorb strongly at the 10.6 \u03bcm CO2 laser wavelength, so a focused laser beam causes rapid heating at or near the surface of the glass. To produce a cut, the glass is translated relative to the beam, and either liquid or air is delivered by nozzles on to the glass to quickly cool it. The resulting thermal shock produces a continuous crack.”
<\/p>\n\n\n\n

Fiber laser implementations<\/strong>
“High repetition rate fiber laser”, thesis<\/a>
160 fs at a 1GHz repetition rate, has an output power of 26 mW <\/p>\n\n\n\n

Yb-fiber based PCMA system, 60-fs pulses with 100-W average power , thesis<\/a><\/p>\n\n\n\n

“Deep in vivo<\/em> two-photon microscopy with a low cost custom built mode-locked 1060 nm fiber laser”, pdf<\/a>
1060 nm, power 1 W, repetition rate of 40 MHz, compressed pulse width of 81 fs.<\/p>\n\n\n\n


<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n



<\/p>\n\n\n\n


<\/p>\n\n\n\n



<\/p>\n\n\n\n


<\/strong><\/p>\n","protected":false},"excerpt":{"rendered":"

200-kW pulsed Fiber Laser (20W continuous) Ultrafast Optics with a Fiber Laser. Video talks about design, shows making couplers, polishing.2 \u03bcm Pulsed Fiber Laser Sources and Their Application in Terahertz Generation, pdfPULSED FIBER LASER AT 1 \u03bcm WAVELENGTH REGION, pdfDEVELOPMENT OF A PULSED FIBER LASER FOR LADAR SYSTEM, pdfAll-Fiber, Directly Chirped Laser Source for Chirped-Pulse\u2013Amplification, […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-1373","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/jimlund.org\/blog\/index.php?rest_route=\/wp\/v2\/pages\/1373","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jimlund.org\/blog\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/jimlund.org\/blog\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/jimlund.org\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jimlund.org\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1373"}],"version-history":[{"count":8,"href":"https:\/\/jimlund.org\/blog\/index.php?rest_route=\/wp\/v2\/pages\/1373\/revisions"}],"predecessor-version":[{"id":2056,"href":"https:\/\/jimlund.org\/blog\/index.php?rest_route=\/wp\/v2\/pages\/1373\/revisions\/2056"}],"wp:attachment":[{"href":"https:\/\/jimlund.org\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1373"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}